Extreme temperature fluctuations and mechanical shock may cause thermal mechanical failure. Stress cracks are generally perpendicular to the cutting edge(tungsten tile cutter tool). Thermo-mechanical failure is most likely to occur during the milling operation, sometimes turning large quantities [Read More]

  Micro-chipping caused from the astable mechanical properties, usually caused by loose fixture, bad or wearing bear, processing materials with hard spots or intermittent cutting. This phenomenon is sometimes appear in unexpected places, such as porous PM materials. [Read More]

   “Build-up edge”  occurs when the extreme forces at the point of contact between the cutting tool (tile cutter tool)and the workpeice weld small particles of the workpiece to the cutting tool(tungsten glass cutter tool). This type of failure is [Read More]

In general, the problem known as cratering could refer to any wear that is caused by the workpiece material interacting with the insert&rsquo s rake face. The most well-known cratering involves a chemical reaction between a steel workpiece [Read More]

Using chemical method to make kinds of brazed carbide tool (tile cutter tool)bits lossing, which could recycle the scrip carbide cutter, and reuse by welding on the new tool rod. Removing copper liquid: Chromium anhydride (Cr2O3) (300 ~ [Read More]