At present, in the field of strong impact abrasive wear, mature large-scale industrial products, high-manganese steels are not used properly. High manganese steel under a strong impact load and contact stress, the surface of the rapid hardening, the [Read More]

At present, material workers in China and around the world have invested a great deal of enthusiasm and energy in the main battlefield of this technological progress. The elements that have been used in the alloying of high [Read More]

Q: Must the magnets hold high manganese steel? A: Not necessarily. Only austenite has a non-magnetic character. High-manganese steel is a typical austenitic steel, so it is not magnetic. However, austenitic steels are not only high-manganese steels, but [Read More]

High manganese steel under a strong impact load and contact stress, the surface of the rapid hardening, the hardness can be dramatically increased from HBS200 to 400-500 and a high density of dislocations and twins have been generated, [Read More]

Silicon: High silicon content reduces the solubility of carbon in austenite, carbides precipitate at the grain boundaries and increases in size. After water toughening, large microscopic porosity is left at grain boundaries, but in order to completely eliminate [Read More]

Manganese: It is an element that forms austenite. It also plays a role in the formation of carbides. Excessive manganese will cause austenite in the structure. Austenite is not suitable for grinding balls, because austenite grinding balls are [Read More]

The crushing wall is fastened to the conical body by means of a conical head screwed through the bushing and the upper spindle thread. For ease of removal and prevention of loosening, a split kerf is provided at [Read More]

When the hammer of the crusher is one of the core components of the hammer crusher, it is arranged on the hammer shaft of the crusher rotor and directly hits the material when the hammer crusher operates. The [Read More]

With the continuous development of wear-resistant materials, high-manganese steel has gradually become unsuitable for the development of the modern foundry industry. Replaced by chromium-molybdenum alloy steel, high-chromium cast iron and nickel hard cast iron. However, the high toughness [Read More]

The  high-manganese steel wear-resistance hammer with tic cermets inserts  has reliable quality and the wear resistance is three times that of the traditional high-manganese steel. The hammer of the crusher is widely used in the large-scale limestone crusher [Read More]