Article Categories

The best HRC is 60-63 of LFT12 TM52 Titanium based steel bonded carbide rod

03/01/2017 langfeng tic based cermet

The best HRC is 60-63 of LFT12 TM52 Titanium based steel bonded carbide rod, because of the work hardening phenomenon, the HRC of the TiC surface layer would be higher during impact can meet HRC 62-65 [Read More]

Main Uses of TiC Based Steel Bonded Carbide Rods

02/28/2017 langfeng tic based cermet

Main Uses of TiC Based Steel Bonded Carbide Rods Parts of the work surface, so that the wear surface of the composite metal wear-resistant parts with excellent wear resistance, non-wear surface with excellent plasticity and impact toughness. TiC-based [Read More]

Application of ceramic based composites material

02/27/2017 langfeng ti(c n)based cermet, Uncategorized

Ceramic materials with high temperature, high strength, high hardness and good wear resistance and other characteristics, but in its fragile weakness limits its wide range of applications. With the rapid development of modern high-tech, requiring the material at [Read More]

Titanium carbide production process quality control

02/22/2017 langfeng carbide powder

1, raw materials testing (ingredients before detection) Sampling methods: a barrel sampling, get 10 points of samples in the iron drum of material by sampling tube, to do testing respectively Test items: chemical composition (including moisture, Fe, S, K, Na, [Read More]

Introduction to Powder Metallurgy

02/16/2017 langfeng carbide powder

Powder metallurgy is the preparation of metal powder and through the forming and sintering process of metal powder or non-metallic powder mixture made of the processing method, can be prepared by ordinary melting method difficult to prepare the [Read More]

Titanium Carbide (TiC) cermet produced by Changsha Langfeng Metallic Material Co.,Ltd

02/09/2017 langfeng tic based cermet

Titanium Carbide (TiC) cermet produced by Changsha Langfeng Metallic Material Co.,Ltd Product technical parameters: 1.Hardness (ISO 3878): 82-89 HRA 2.Density :6.0-6.5g/cm3 3.TRS (ISO 3327): 1800-2000 N/mm2 4.Average Grain Size: 1.0 +0.5 μm 5.Porosities: A02B00C00 6.CHEMICAL: TiC(47%)-Fe(37%)-Other(16%) application range: [Read More]

Tic base metal carbide development history

01/20/2017 langfeng tic based cermet

About 1960, the United States made the company of nickel-molybdenum alloy bonded TiC-based cermet cemented carbide. Adding molybdenum to nickel, forming Mo2C when sintered, and forming an unbalanced TiC-Mo2C solid solution on the TiC crystal grains to obtain [Read More]

Characteristics of microwave sintering process

01/13/2017 langfeng industry microwave furnace

The principle of microwave sintering equipment is to use microwave oven electromagnetic field and material interaction, so the sintering process and specific microwave devices and each material itself performance: Lower, once the critical temperature of heating, the material [Read More]

Cermet tool performance

01/07/2017 langfeng tic based cermet

Cermet tools have higher toughness than ceramic tools, are more abrasive and faster than carbide, and metal ceramics have superb surface finish and high-speed processing. High-speed finishing and milling technology for mild steel, carbon steel, alloy steel and [Read More]

Laboratory tube furnace

12/29/2016 langfeng industry microwave furnace, Uncategorized

Laboratory tube furnace of high-temperature industrial microwave tube furnace combines advantages of microwave muffle furnace, microwave ashing furnace, microwave sintering oven, microwave lab oven and microwave vacuum furnace, it is applicable for calcination, sintering synthesis, heating, pyrolysis, ash, [Read More]

« 1 … 13 14 15 16 17 … 58 »

November 2024
M	T	W	T	F	S	S
« May
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30