Article Categories

The main application of chromium carbide powder

11/11/2016 langfeng carbide powder

Chromium carbide is used for special welding materials Can be used for the manufacture of special welding materials, surfacing series of welding rod, flux-cored wire. Carbide is used for carbide Adding Cr3C2 in cemented carbide production can not [Read More]

Application of Microwave Oven in Pharmaceutical Industry

11/08/2016 langfeng industry microwave furnace

Application of Microwave Oven in Pharmaceutical Industry: Microwave technology in the pharmaceutical industry mainly in the following areas: powder, granular, flaky, pills like mucilage and other medical products, dry sterilization, rapid drying of Chinese herbal medicine, insecticidal, sterilization. [Read More]

Ultra-fine grain Carbide

11/04/2016 langfeng tungsten cutter wheel

Ultra-fine grain Carbide: Has a high wear resistance and high toughness performance. According to the different processing equipment and materials to be processed conditions, to select the corresponding high-quality imports of ultra-fine grain carbide (tungsten steel) material, the [Read More]

Comparison of Titanium Carbide Cermet Rod and Carbide Rod

11/01/2016 langfeng tic based cermet

First of all, the cost of titanium carbide cermet rod is far lower than the cost of carbide rods, followed by titanium carbide rods and high manganese steel substrate combination can play its greatest role, carbide with high [Read More]

Cooling Methods of Microwave Equipment

10/27/2016 langfeng industry microwave furnace

Microwave equipment due to work in the microwave source and its transformer will produce high temperature, to protect their normal work and life must be effective for these devices to temperature control (that is, cooling, cooling). Our microwave [Read More]

Particle size of chromium carbide powder and its application

10/24/2016 langfeng carbide powder

1: Average Particle Size Fischer’s Particle Size APS FSSS 3-5um microns, which are widely used in grain inhibitors and grain refiners for hard alloy products (cutting tools), improve hardness, wear resistance, strength and toughness. 2: high temperature environment [Read More]

Microwave drying sterilization characteristics

10/21/2016 langfeng news in company

Microwave drying sterilization characteristics 1, rapid and uniform heating. Can instantly penetrate the heated material. Penetration depth of up to a few centimeters, or even ten centimeters, will not appear “outside the coke endogenous” phenomenon. 2, energy efficient. [Read More]

Application of Microwave in Chemistry and Chemical Engineering

10/17/2016 langfeng industry microwave furnace

In recent years, microwave energy in the chemical industry more and more widely used, the country is also catching up. And in the chemical industry, rubber, paper, analysis of new materials and other industries gradually be promoted, and [Read More]

Selection of tool material

10/13/2016 langfeng news in company

Tool material is to determine the cutting tool performance of the fundamental factors for processing efficiency, processing quality, processing costs and tool life greatly affected. The harder the tool material, the better its wear resistance, the higher the [Read More]

Tantalum carbide powder application

09/30/2016 langfeng carbide powder

Tantalum carbide powder for powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy cutting tools, tools, molds and wear-resisting structural components of additives to improve the toughness of the alloy. Tantalum carbide sintered body shows [Read More]

« 1 … 15 16 17 18 19 … 58 »

November 2024
M	T	W	T	F	S	S
« May
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30