TiC high wear resistance steel bonded hard alloy fero-TiC Titanium Carbide rod,  which contains 47-50wt% of a hard phase TiC and 37-40 wt% of a bonding phase high manganese steel, wherein the bonding phase contains, by weight, 2.0-4.0% of Ni, 10.0-12.0% of Mn, and the balance elements. The high fierce steel bonded fero-tic titanium carbide rod is mainly prepared by the following steps of: proportioning, compaction, sintering. The non magnetic titanium alloy material has advantages of uniform austenite microstructure, high wear resistance, good strength and good pourability. Fero-Tic inserts are widely  used in mining industry, especially on high manganese steel crusher hammer.

Applications :

Below wear parts for cement plants and mineral mining factories

Stone Crushers, Mineral Pulverizing, Rail Crossings, Liners, Grates, Earth Moving, Pipe Lines and Bends Conveying Abrasive Media, Construction Equipment

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com