titanium steel alloy

Cermet tool performance

01/07/2017 langfeng tic based cermet

Cermet tools have higher toughness than ceramic tools, are more abrasive and faster than carbide, and metal ceramics have superb surface finish and high-speed processing. High-speed finishing and milling technology for mild steel, carbon steel, alloy steel and [Read More]

Titanium carbide-based cermet rod

11/22/2016 langfeng tic based cermet

, 1.Titanium carbide-based cermet rod 2. Wear-resistant – long service life can increase the life of crusher hammer 3-5 times. 3. Product advantages Titanium carbide cermet can be used in very harsh working conditions to improve the service [Read More]

Comparison of Titanium Carbide Cermet Rod and Carbide Rod

11/01/2016 langfeng tic based cermet

First of all, the cost of titanium carbide cermet rod is far lower than the cost of carbide rods, followed by titanium carbide rods and high manganese steel substrate combination can play its greatest role, carbide with high [Read More]

Hardness and toughness of carbide cutting tools

09/14/2016 langfeng news in company

WC-Co cemented carbide has unique advantages in both hardness and toughness. Tungsten carbide (WC) itself has high hardness (more than corundum, or aluminum oxide), and at elevated operating temperatures rarely drop its hardness. However, it lacks sufficient toughness, [Read More]

High Fierce Steel Bonded Fero-TiC Titanium Carbide Rod

09/08/2016 langfeng tic based cermet

TiC high wear resistance steel bonded hard alloy fero-TiC Titanium Carbide rod, which contains 47-50wt% of a hard phase TiC and 37-40 wt% of a bonding phase high manganese steel, wherein the bonding phase contains, by weight, 2.0-4.0% of [Read More]

TiCN-based cermets used as cutting tools

07/15/2016 langfeng ti(c n)based cermet

These tools are applied for high-speed finishing and semi-finishing of carbon steels and stainless steels . They can also be utilized in machining and finish milling of alloy steels and cast irons as well as the normal carbon [Read More]

The plunging advantages

06/24/2016 langfeng news in company

The plunging will reflect the following advantages: 1. feed rate constant When using Z level processing methods, chip load (IPT) varies radially and axially exposure increases or decreases.When the transverse cutting, although radial contact and span will be [Read More]

Tic rod titanium carbide rod

06/07/2016 langfeng tic based cermet

The TiC rod also named high mangness steel combined alloy, which is mainly used for heavy machinery hammer head of crusher, which improving the working life 3to5 times of the equipment, since the titanium have strong high temperature [Read More]

M	T	W	T	F	S	S
« May
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30