One new type high manganese steel crusher hammer with tic cermet rod is a good substitute for high chromium cast iron complex crusher hammer. It solves the problem of easy to be broken with high hardness in high chromium crusher [Read More]

The alloyed high-manganese steel wear-resistance hammer has reliable quality and the wear resistance is three times that of the traditional high-manganese steel. The hammer of the crusher is widely used in the large-scale limestone crusher supporting the domestic [Read More]

Hammer crusher hammer head wear increased. Hammer head weight is generally calculated as 27 kg, and the effective wear amount is one-third, ie 9 kg. The improved structure has a small total weight change and an effective wear [Read More]

When the hammer of the crusher is one of the core components of the hammer crusher, it is arranged on the hammer shaft of the crusher rotor, and directly hits the material when the hammer crusher operates. Hammer [Read More]

The purpose of sintering is to make porous mechanically bonded powder compacts into dense metallurgically bonded alloys. In order to obtain the desired physical and mechanical properties, the final properties of the alloy depend on its microstructure, and [Read More]

The ratio range of the binder phase and the hard phase of the steel-bonded hard alloy steel substrate is quite broad, and the content of the steel substrate can in principle vary within the range of 20-80% by [Read More]

High manganese steel, as the oldest wear-resistant material, its composition (mass fraction) range: w (C) = 0.9% ~ 1.4%, w (Mn) = l0% ~ 15%, w (Si ) = 0.3% to 0.8%, w(S) ≤ 0.05%, w(P) ≤ 0.10%. [Read More]

1, TiC-based steel bonded carbide with machinability, heat-treatability, malleability and weldability 2, can be a variety of hardening treatment, and heat treatment less deformation.  TiC-based cemented carbide with high hardness, wear resistance, high rigidity, modulus of elasticity and [Read More]

TiC-based steel cemented carbide is a steel-based composite material made of steel as a binder, a hard compound for the hard phase, prepared by the powder metallurgy method. Inlay cast TiC-based carbide high manganese steel castings, wear resistance [Read More]

TiC- bonded carbide has excellent chemical stability, high temperature resistance, anti-oxidation, anti-corrosion of various media (such as the atmosphere, gas, sea water, oil, acid, alkali, salt, etc.). Corrosion resistance of TiC- Ferro alloys depends on the type of substrate, choose [Read More]