Article Categories

TiC cermet rods used in High Manganese steel wear parts

03/23/2018 langfeng tic based cermet

High manganese steel, as the oldest wear-resistant material, its composition (mass fraction) range: w (C) = 0.9% ~ 1.4%, w (Mn) = l0% ~ 15%, w (Si ) = 0.3% to 0.8%, w(S) ≤ 0.05%, w(P) ≤ 0.10%. [Read More]

Production process of TiC powder

03/23/2018 langfeng carbide powder

Industrial TiC powders were originally prepared by reducing TiO2 with carbon black. The reaction temperature ranged from 1700 to 2100°C. The reaction equation was as follows: TiO2(s) +3C(s) = TiC(s) + 2CO(g) Because the reactants exist as dispersed [Read More]

Titanium carbide used in TiC cermet

03/23/2018 langfeng carbide powder

Titanium carbide has a high melting point, high bowl height, and good chemical stability. It is mainly used to make cermets, heat-resistant alloys and hard alloys. The composite materials prepared with titanium carbide have a wide range of [Read More]

Application of HfC Powder

01/31/2018 langfeng carbide powder

HfC powder widely used in electronics, coatings, spraying, carbide, aerospace, atomic energy, rigid film and metallurgical automation and other high-tech areas of key materials. Especially for rocket nozzles, can be used to re-enter the atmosphere of space rocket [Read More]

TiC-based carbide Carbide Features:

01/31/2018 langfeng tic based cermet

1, TiC-based steel bonded carbide with machinability, heat-treatability, malleability and weldability 2, can be a variety of hardening treatment, and heat treatment less deformation. TiC-based cemented carbide with high hardness, wear resistance, high rigidity, modulus of elasticity and [Read More]

High Melting Point of HfC and TaC

01/31/2018 langfeng carbide powder

Metallic carbides, especially those of Group IVB, VB and VIB, all have a melting point above 3273K, of which hafnium carbide and tantalum carbide are 4160K and 4150K, respectively, and are the highest melting point among the currently [Read More]

Study on Performance of High Manganese Steel Wear Resistant Castings with TiC – based Hard Cemented Carbides

01/30/2018 langfeng tic based cermet

TiC-based steel cemented carbide is a steel-based composite material made of steel as a binder, a hard compound for the hard phase, prepared by the powder metallurgy method. Inlay cast TiC-based carbide high manganese steel castings, wear resistance [Read More]

Brief Introduction of Hafnium Cabide powder

01/30/2018 langfeng carbide powder

Hafnium carbide powder is a kind of a black odorless powder. Density :12.7g/cm3, melting point : 3890°C…etc. CAS No.12069-85-1, UN No.3178. HfC powder has the properties of high toughness, high melting point, high strength and corrosion resistance, high-temperature [Read More]

Brief Introduction of Titanium Carbide Powder

01/30/2018 langfeng carbide powder

Titanium carbide exhibits high melting point, chemical stability, mainly used to create metal ceramics, heat-resistant alloys and cemented carbides. The multiphase materials prepared by titanium carbide powder can be used in the mechanical processing, metallurgy and mineral, aerospace, [Read More]

Titanium Carbide Powders’feature

01/29/2018 langfeng carbide powder

TiC powder,density: 4.93g/cm3, melting point: 3140°C，boiling point:4300℃,English name: titanium carbide powder, CAS NO.,: 12070-08-5, UN code 3178，Molecular formula:TiC,grey black powder with cubic system NaCI structure.As high melting point、high hardness、good chemical stability. For more information please link:www.langfengmaterials.com,please contact us as following: Skype:cslfjoselyn Wechat: 563302383@qq.com [Read More]

« 1 … 7 8 9 10 11 … 58 »

November 2024
M	T	W	T	F	S	S
« May
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30