sintering technology

The application of microwave sintering in ceramic materials

Since the advent of microwave sintering technology, has been extensive attention from all countries, and the application fields are also small fault. The Swedish institute of microwave technology using microwave energy to the ultra pure silica heated to above 2000 ℃ to make optical fiber, compared with the traditional heat source, not only reduce energy consumption, and reduced the sublimation rate on the surface of the quartz. The United States, Canada and other countries by microwave sintering batch manufacture spark plug porcelain, Zr02, Si3N4, SiC and Al2O3 – TiC and superconducting materials such as ceramic material. In recent years, microwave sintering technology appeared many new applications. Using microwave synthesis of nanomaterials have also made certain progress. The preparation of nanometer powder is not easy, has the nanometer grain materials preparation is more difficult to block. And microwave sintering technology has low sintering temperature, and time is short for successful preparation of the material. Yun-kai li and others using Al2O3 and Beijing university of science and technology Zr02 (3 y) nano powder as raw materials, ratio of small with AI2O3 – Zr02 (3 y) duplex ceramics was studied by means of microwave sintering, a high density, the fracture toughness of materials have greatly improved. Eastman et al. Preparation of the average particle size of 14 nm TiO,, and obtained the good sintering properties, fracture toughness of material is better than 60% higher than that of conventional sintering method preparation of the material. Microwave sintering technology also have some achievement in the ceramics side.Thakur O P and other people researched microwave synthesis and sintering ,and found that with the high density sintered BST microwave synthesis of small particle size and particle uniformity, linear thermal diffusion coefficient and dielectric properties than conventional sintering the BST is good, and the synthesis and sintering time was shortened. Liu HX and others with microwave hydrothermal synthesis of PZT piezoelectric ceramic powder, powder particle synthesis between the 40nm-60nm and the particle size distribution is relatively narrow. With the continuous development of small microwave technology, especially the development of its application of green ceramic will play a more important role in the field of ceramics. Stay tuned for detailed product information company official website:www.industryequips.com, please contact: angela@metalcarbidepowder.com [Read More]