TM52 titanium carbide based steel bonded cemented carbide rod, our hot sale size is D12 x 50mm，D12 x 60mm，D14 x 40mm，D14 x 50mm，D14 x 60mm，D16 x 90mm, the size could be customized.Below is the design chart we made [Read More]

In our experience,plus TiC rods wear parts for your reference: 1)The tic rods do not need be heated before casting. 2)Only suitable for the high manganese steel material’s steel water. 3)The steel water’s casting temperature need increase 60-100 [Read More]

TM52 taitanium carbide steel bonded rods VS cemented carbide rods: First of all, TM52 carbide-based titanium carbide cermet carbide rods cost is far lower than cemented carbide rods; Secondly TM52 titanium carbide steel bonned rods and high manganese [Read More]

One of the most important process characteristics of TiC Steel bonded alloy  is processability and heat treatability. Therefore, some people refer to the TiC Steel bonded alloy as machinable and heat-treatable steel bonded carbide. The so-called machinability refers [Read More]

TiC cermet rods’ hardness can not be higher than HRC62, HRC60 is the best. Once combined with high manganese steel substrate, surface hardning will happen under strong impact, that is the reason why the high manganese steel wear [Read More]

High wear resistance titanium carbide cermet rods advantages: high wear resistance titanium carbide cermet rods evenly distributed in the work site, it effectively reduce the wearness of base high manganese steel material. So the service life of below [Read More]

Taking low-cost high-manganese steel or ultra-high manganese steel as large wear-resistant base material,casted with TiC steel bonded carbide rods,the new wear parts’s wearing side has excellent wear resistance,while non-wearing side with excellent plasticity and impact toughness.It has been successfully [Read More]

Advantage: Why Langfeng Material’s steel bonded titanium carbide TiC rod is better? 1: use high purity raw material : Fe,Mn, Ni, and home made Titanium carbide powder;. Strictly control in raw material ensure the high quality of TiC [Read More]

TM52 Steel Bonded Titanium Carbide Rod, which contains a hard phase TiC and a bonding phase high manganese steel, wherein the bonding phase contains, by weight, Ni, Mn, and the balance elements.  Hardness  HRC 60-62, denstiy 6.2 ±0.2 g/cm3. [Read More]

TiC-Ferro Cermet carbide is a steel bonded phase to refractory metal carbides (mainly titanium carbide, tungsten carbide, etc.) for the hard phase, prepared by the powder metallurgy process of a class of materials. Its organization is characterized by [Read More]