industry microwave furnace | Langfengmetallic.blog

Analyzing Microwave synthesis of carbon titanium nitride

10/16/2015 langfeng industry microwave furnace

This shows that: (1) microwave carbothermal reduction can be a one-time synthesis Ti (Cx, N1-x) single-phase solid solution, but the impact factor synthesis process and more controlled conditions with high requirements, set beforehand to get the x value [Read More]

Microwave synthesis of carbon titanium nitride Results and discussion(4)

10/15/2015 langfeng industry microwave furnace

Obviously, the overall effect of the above is the thermodynamics and kinetics of the synthetic TiN and TiC reaction rate and production rate is closer, especially # 2 ingredients such effect some more obvious: since 2 # ingredient [Read More]

Microwave synthesis of carbon titanium nitride Results and discussion(3)

10/15/2015 langfeng industry microwave furnace

TiN and thermodynamic calculations based on synthetic and synthetic formulas Ti (Cx, N1-x) of the XRD patterns of TiC, synthetic Ti (Cx, N1-x) solid solution may be involved in the process of synthesis and the corresponding equation in [Read More]

Microwave synthesis of carbon titanium nitride Results and discussio(2)

10/14/2015 langfeng industry microwave furnace

For Program (1) and ((2), the thermodynamic minimum reaction temperature was 948 ℃ and 1084 ℃, the minimum gap between the reaction temperature reached 136 ℃, andmicrowave heating TiN and TiC synthesis results also showed high reactivity the [Read More]

microwave synthesis of carbon titanium nitride results and discussion(1)

10/13/2015 langfeng industry microwave furnace

Results and discussion Formula 2 after 1200 ℃ heat for 10 minutes and 1300 ℃ heat for 10 minutes and formula 1 through 1200 ℃ respectively, 1300 ℃ and 1400 ℃ were heat preservation after 10 minutes of microwave [Read More]

Microwave synthesis of carbon titanium nitride experiments

10/12/2015 langfeng industry microwave furnace

Experiments accurately weighed TiO2 and carbon black, mixed in a ball mill, ball milling with ethanol as medium milling time is lOh, after milling is completed, the sample was placed in a drying oven, and then the resulting [Read More]

Microwave synthesis of carbon titanium nitride Results and discussion(3)

10/11/2015 langfeng industry microwave furnace

TiN and thermodynamic calculations based on synthetic and synthetic formulas Ti (Cx, N1-x) of the XRD patterns of TiC, synthetic Ti (Cx, N1-x) solid solution may be involved in the process of synthesis and the corresponding equation in [Read More]

Microwave sintering abtract

10/10/2015 langfeng industry microwave furnace

Coherent electromagnetic waves in the microwave frequency between 0.3~ 300GHz. Since the 1940s, microwave radar, communications, energy,plasma and solid state physics and other fields has been widely used. Microwave sintering materials began in the mid 1960s, Levinson [1] [Read More]

Technical science – selective analysis of microwave heating

10/04/2015 langfeng industry microwave furnace

As the name suggests, it refers to the microwave selective heating of some material can be heated while heating the material can not be certain.Therefore divided into four categories according to the material properties are described: the first [Read More]

microwave heating temperature of high power test

09/30/2015 langfeng industry microwave furnace

In high temperature microwave reactor, the temperature of the material is an important process and control parameters. In microwave power density is relatively low, the shielding case can be used with conventional thermocouple temperature measurement or thermistor resistance [Read More]

M	T	W	T	F	S	S
« May
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30