Lateral cutting applications, the force exerted on the tool so that the tool will be pushed away from the workpiece.The offset of the tool depends on many factors: such as infeed depth, feed rate and machine rigidity. Tool geometry and inserts will also be greatly affected by these forces, which is the latest improvement of a new side of the cutting tool.
Complex carbide inserts carbide inserts compression molding process, for developing new cutter to create the conditions, with such cutting forces cutter used to make smaller, thus reducing the tool offset error.In most cases, the use of this new technology eliminates the need to cut into the bottom of each of the manufacturing recession angle 45 °, and the programming is much easier, so you can allow the machine at the time of entry of the Prior drilling program (G81, G85), is particularly suitable for simple two workpiece geometry processing.
Of course, in the process will inevitably produce some bending forces, but also in the contraction, inserts come into contact with a small amount of material.Vice posterior horn should be increased on the lead angle, which is conducive to small amounts of materials, tools / inserts can handle during shrinking.
Stay tuned for detailed product information company official website: http://www.langfengmetallic.com/, please contact: firstname.lastname@example.org